Cciss RAID controller driver; hpsa RAID controller driver. There is a HP support documentation about Debian GNU / Linux 6.0. Hp Proliant Ml150 G6 may sometimes be at fault for other drivers ceasing to function These are the driver scans of 2 of our recent wiki members.Scans were performed on computers suffering from Hp Proliant Ml150 G6 disfunctions.
![]() ![]()
Installation:
USB Key - HPQUSB.exe is a Windows-based utility to locally partition, format and copy necessary files to a USB flash media device (e.g. HP Drive Key) through the Windows environment. The created USB flash media device is made bootable and ready to locally restore and/or update the firmware on the system.
1. Obtain a formatted USB Key media.
2. Download the SoftPaq to a directory on a system running Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows Server 2003, Microsoft Windows Server 2008, or Microsoft Windows Server 2008 R2 and change to that directory.
3. From that drive and directory, execute the downloaded SoftPaq file: Simply double click on the SPxxxxx.exe file and follow the installation wizard to complete the SoftPaq installation process. At the end of a successful installation of the SoftPaq a web page will automatically appear to provide you with the different methods for restoring and/or upgrading the firmware on the system.
4. After the USB Key is created, you may delete the downloaded file if you wish.
5. Insert this USB Key into the USB Key port of the system to be updated and power the system on to boot to the USB Key.
Release NotesEnd User License Agreements:
Due to system security configuration set to 'high', a supported system may experience any of the following errors when attempting to install or update the system with Systems ROMPaq Firmware Upgrade for HP ProLiant ML150 G5 Servers (For USB Key-Media) version 2010.10.25 (A):
Upgrade Requirement: Important:
Important Notes:
None
Deliverable Name:
HP ProLiant ML150 G5 System ROM - O17
Release Date:
10/25/2010
Last Recommended or Critical Revision:
10/25/2010
Previous Revision:
10/30/2009
Firmware Dependencies:
None
Enhancements/New Features:
None
Problems Fixed:
Resolved a processor issue where an unlikely and complex sequence of conditions operating in 64-bit mode could result in an application-level error, blue screen, kernel panic, or other unpredictable system behavior. This issue affects platforms utilizing Intel Xeon E5200-series, and Intel Xeon E5400-series processors. This issue is not unique to HP ProLiant servers and could impact any system using affected processors. This revision of the System ROM contains an updated version of Intel microcode for affected processors that addresses this issue. Due to the potential severity of the issue addressed in this revision of the System ROM, this System ROM upgrade is considered a critical fix. HP strongly recommends immediate update to firmware revisions with required critical fixes.
Known Issues:
None
FixesUpgrade Requirement:
Important Notes:
None
Firmware Dependencies:
None
Problems Fixed:
Resolved a processor issue where an unlikely and complex sequence of conditions operating in 64-bit mode could result in an application-level error, blue screen, kernel panic, or other unpredictable system behavior. This issue affects platforms utilizing Intel Xeon E5200-series, and Intel Xeon E5400-series processors. This issue is not unique to HP ProLiant servers and could impact any system using affected processors. This revision of the System ROM contains an updated version of Intel microcode for affected processors that addresses this issue. Due to the potential severity of the issue addressed in this revision of the System ROM, this System ROM upgrade is considered a critical fix. HP strongly recommends immediate update to firmware revisions with required critical fixes.
Known Issues:
None
Important
Important Notes:
None
Deliverable Name:
HP ProLiant ML150 G5 System ROM - O17
Release Date:
10/25/2010
Last Recommended or Critical Revision:
10/25/2010
Previous Revision:
10/30/2009
Firmware Dependencies:
None
Enhancements/New Features:
None
Problems Fixed:
Resolved a processor issue where an unlikely and complex sequence of conditions operating in 64-bit mode could result in an application-level error, blue screen, kernel panic, or other unpredictable system behavior. This issue affects platforms utilizing Intel Xeon E5200-series, and Intel Xeon E5400-series processors. This issue is not unique to HP ProLiant servers and could impact any system using affected processors. This revision of the System ROM contains an updated version of Intel microcode for affected processors that addresses this issue. Due to the potential severity of the issue addressed in this revision of the System ROM, this System ROM upgrade is considered a critical fix. HP strongly recommends immediate update to firmware revisions with required critical fixes.
Known Issues:
None
Revision History
Version:2010.10.25(A) (8 Dec 2010)
Upgrade Requirement:
Important Notes:
None
Firmware Dependencies:
None
Problems Fixed:
Resolved a processor issue where an unlikely and complex sequence of conditions operating in 64-bit mode could result in an application-level error, blue screen, kernel panic, or other unpredictable system behavior. This issue affects platforms utilizing Intel Xeon E5200-series, and Intel Xeon E5400-series processors. This issue is not unique to HP ProLiant servers and could impact any system using affected processors. This revision of the System ROM contains an updated version of Intel microcode for affected processors that addresses this issue. Due to the potential severity of the issue addressed in this revision of the System ROM, this System ROM upgrade is considered a critical fix. HP strongly recommends immediate update to firmware revisions with required critical fixes.
Known Issues:
None
Version:2009.10.30 (A)(17 Nov 2009)
Upgrade Requirement:
Optional
Users should update to this firmware revision if their system is affected by one of the documented fixesor if there is a desire to utilize any of the enhanced functionality provided by this revision.
Important Notes:
None
Firmware Dependencies:
BMC Firmware Version 3.11 or later.
Problems Fixed:
Resolved an issue where the wrong maximum memory size was in the SMBIOS table. The maximum memory size was updated from 16GB to 32GB.
Known Issues:
None
Added support for USB DAT320 tape.
Version:2009.07.06(A)(31 Jul 2009) Upgrade Requirement: Resolved a potential hang condition under Windows Server 2008, while performing heavy disk I/O or formatting logical drives on a system configured with an HP SC44Ge or HP SC40Ge HBA installed in the PCIe x8 slot.
Resolved an issue where the IPMI driver fails to initialize under a Linux Operating system.
Resolved an issue where fans would intermittently run at full speed right after boot.
Disabled the correctable error system event log entry whenever a correctable error occurs on a PCI-express device.
Resolved an issue where an inaccurate CPU low temperature is displayed under the IPMI page in the BIOS Setup utility and the Lights Out 100c management page.
Resolved an issue where an inaccurate Ambient System Temperature is displayed in the Lights Out 100c management page.
Resolved an issue where unavailable CPU/system FAN speed and CPU temperature is displayed in Lights Out 100c management page.
Resolved an issue where the WLK 1.4 WHEAHCT test fails under Microsoft Windows 2008 R2 OS.
Resolved an issue where the Platform Event Filtering function is disabled by the system BIOS after every boot.
***NOTE: When upgrading to BIOS version 2009.07.06 or later HP requires that the BMC version 3.11 or later is also installed on the system in order for proper server operation. Version:2009.01.15 (A)(17 Mar 2009)
Resolved an issue where the system timestamp count may be invalid after a system reset.
Resolved an issue where system performance was affected during an ECC memory error correction.
Resolved an issue where the system will hang during POST when 'Console Redirect' is enabled and 'CR after POST' is disabled in the BIOS Setup utility.
Resolved an issue where the system takes up to three minutes to detect a SATA HDD whenever the disk drive is installed in port 5 or 6 and a USB device is attached.
Resolved an issue where an NMI is not generated when an uncorrectable memory error is detected.
Resolved an issue where an NMI is not generated when a fatal or non-fatal error occurs on the PCI Express bus.
Resolved an issue where a Mellanox Infiniband card driver fails to load under Red Hat Linux OS.
Added manufacturing ID in FRU data which can be accessed through IMPI.
Added slot number identification of failed memory DIMMs for memory error events under the IPMI System Event Log page in the BIOS Setup utility.
Added the sensor name to identify the failed device in the system event log under the IPMI System Event Log page in the BIOS Setup utility.
Version:2008.10.02 (A)(28 Oct 2008)
Resolved an issue where system fan failures and redundant power supply failures are displayed as 'Unknown' events in the Light-Out 100 interface.
Resolved an issue where the processor core number is displayed incorrectly in the BIOS setup utility whenever the Intel processor 5200 series is installed.
Resolved an issue where installing a Microsoft Windows OS will fail with the Smart Array P400/P800 and a USB CD-ROM installed.
Resolved an issue where the SAS HBA driver will fail to load during a Windows OS installation with a USB tape drive installed.
Resolved an issue where the system fails to enter the SAS HBA and Smart Array configuration utility after pressing the F8 key through serial console.
Resolved an issue where the system will shutdown due to a fan status detection failure on the first boot after an AC power recovery.
Resolved an issue where the system will not perform a shutdown after clearing CMOS if a system fan 1 failure occurs.
Resolved an issue where the CPU speed is mismatched in the SMBIOS table whenever an Intel XEON 5400 or 5200 processor is installed.
Resolved an issue where the CPU speed is displayed incorrectly during POST and in the BIOS Setup utility whenever the Core Multi-Processing option is disabled in the BIOS Setup utility.
Resolved an issue where the processor information is displayed incorrectly during POST whenever the Intel uni-processor X3363, 3353 or 3323 is installed.
Known Issue: Enhanced Intel speed step function fail under Linux OS.
Added support for the latest Dual-Core Intel Xeon 5200-series and Quad-Core Intel Xeon 5400-series processors.
Added support in the BIOS setup menu to enable or disable the hard disk (HDD) write cache.
Added support for the Processor Core C3 power management feature. On supported processors, this feature will allow inactive cores to go into a lower power state when another core on the processor package is active. Power savings will vary based on the type of workload being run on the server.
Version:2008.03.08 (A)(21 Mar 2008)
Resolved an issue where the message 'Error attaching device data' occurs whenever the system is booted to Linux Redhat 5 update 1 32 or 64bit versions.
Resolved an issue where a multi-bit memory error failed to log a system event into the BMC.
Resolved an issue where a non-fatal error issues on a PCI express device failed to log a system event into the BMC.
Resolved an issue where the Wake-On LAN option in the BIOS Setup Utility failed to disable the embedded NIC.
Resolved an issue where newly inserted USB devices appear as the highest priority in the boot order when USB Boot Precedence is disabled in the BIOS Setup utility.
Resolved an issue where the DHCP IP address cannot be resolved without a reset under IPMI menu in the BIOS Setup utility.
Resolved an issue where the CPU and the system FAN are at full speed during the loading of BMC configuration data after a system shutdown or reset.
Resolved an issue where the embedded NIC MAC addresss is displayed incorrectly in the BIOS Setup utility if a Smart Array E200 card is installed.
Resolved an issue where the health LED will blink red after a system power off with XEON processor E5205,E5405, or E5410 installed.
Added Adjacent Cache Line Prefetch and Hardware Prefetcher option under the CPU Configuration menu in the BIOS Setup utility.
Added IntelR Virtualization Tech option under the CPU Configuration menu in the BIOS Setup utility.
Updated to latest INTEL memory support.
Version:2008.01.31 (A)(11 Feb 2008)
Updated the support code for the Dual-Core Intel Xeon 5200-series and Quad-Core Intel Xeon 5400-series processors. This System ROM version integrates a new version of the Intel support code that addresses an issue that may result in a Machine Check Exception (MCE) or system hang. This issue requires a rare set of conditions, resulting in a low probability of occurrence. The issue is not specific to any software application or operating system environment. This System ROM has minimal to no performance impact on affected processors and is a complete and comprehensive resolution of this issue. This issue does not affect the Dual-Core Intel Xeon 5000-series, Dual-Core Intel Xeon 5100-series, or Quad-Core Intel Xeon 5300-series processors, and this System ROM upgrade does not affect operation of these processors in any manner. Additional information on this erratum can be found on Intel’s public website and in a Hewlett-Packard Customer Advisory.
Version:2008.01.09 (A)(11 Feb 2008)
Initial release.
![]()
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |